Fabulous Ribbon Binding with Binder Attachment 88

A note from Ed Roux, author of a series on heirloom sewing techniques for WeAllSew:

Have you considered using ribbon with your BERNINA Binder Attachment 88? There is almost an infinite variety of ribbon colors and patterns to choose from, and withBinder Attachment 88 you caneffortlessly attach sewn ribbon bindings to your quilts, home dec or garment projects. Using commercially available ribbon is an alternative to using bias tape or manually cut straight- or bias-cut binding strips. More importantly, it can be more convenient to use as it is pre-cut and unrolls from a spool. Ribbon also adds a distinctive contrast depending on the project.

Most flat woven polyester or rayon silk, grosgrain, taffeta or linen ribbon will feed beautifully in your BERNINA 88 Binder Attachment to bind projects with straight or gently curved edges.

You may also want to consider using bias cut Silk Habotai or China ribbon to:

Three ribbon widths work well with the three BERNINA 88 Binder Attachment sizes and the Binder Foot95/95C:

For the skirt placket of my Christina Christening Gown, I chose to use 1-inch Grosgrain ribbon with the BERNINA 38mm 88 Binder Attachment. (To see how I stitched and cut absolutelyperfect buttonholes for Christina, see Through the Needle ONLINE magazine Issue 12.)

Using the BERNINA 88 Binder Attachment is a very fast way to attach binding to projects, and yields professional-looking results that are otherwise extremely difficult to achieve.

1. Thread ribbon through the binder attachment to form a double fold under the binder foot.

2. Test the formation of the binding by starting the stitching with a test piece of fabric (this will be cut after binding is completed). Adjust, if necessary, to ensure the ribbon forms a beautiful double fold under the foot. Adjust the needle position if necessary so the straight stitch is positioned just inside the left edge of the folds.

3. Feed the edge of the skirt slit inside the fold of the ribbon and sew the binding to finish the placket.

4. The raw edges of the placket are finished with a beautiful grosgrain ribbon binding.

5. Finish the placket by folding the binding over itself and stitching a45 degree angled seam at the bottom. Trim theends and finish the garment.

Experiment with different types of ribbon and the BERNINA 88 Binder Attachment:

This sample stitching of the BERNINA ExclusiveSepia Petals embroidery collection in gold and bronze metallic threads was finished with 1-wide wired-edge gold metallic ribbon using the 38mm Binder Attachment 88.

For couture detail finishing, consider using 1-widebias cut100% silk Habotai ribbon on 100% wool suiting to create Hong Kong seams with the28mm Binder Attachment 88 instead of using a serger to finish the seams allowances.

If you have two or more BERNINA sewing machines and you are sewing a garment project that requires a lot of these bind-finished seams, you may want to consider dedicating one of your precision machines for binding so BERNINA Binder Attachment 88 is readily available at any point throughout your project.

Watch WeAllSew.com for more of the Christina story and the techniques used to create it!

You must be logged in to post a comment.